Using The Headset - Plantronics T10H User Manual

STEP 2

USING THE HEADSET

The Headset included with the T10 Headset Telephone
can be used with the Adjustable Headband or with one of the
Earloops.
HEADBAND USE
Snap the Adjustable Headband
Assembly . Press the Ear Cushion Assembly
Assembly , aligning the notch in the ring with the Voice
Boom.
Place the Headset on either ear and adjust the Headset to a
comfortable position by moving the Adjustable Headband.
Position the Voice Boom
EARLOOP USE
Press the Pivot Ball Ring
Insert one of the Earloops
need to try each size to find the most comfortable fit. Slip the
Earloop over your ear and position the Voice Boom near the
corner of your mouth.
CLOTHING CLIP
The Clothing Clip
cord. Attach the clip to your clothing at about chest level. Allow
enough slack in the cord (approximately 6 inches) to permit your
head to move without pulling on the Headset or the Clothing Clip.
You are now ready to make or receive calls.
into the back of the Headset
near the corner of your mouth.
onto the Headset Assembly.
into the Pivot Ball. You may
keeps the Headset free from the weight of the
6
onto the Headset
A
B
C
D