Installing The Handset Battery; Charging The Handset And Headset; Using The Headset And Handset; Using Your Headset For The First Time - Plantronics CALISTO PRO Getting Started

Completed System
Calisto Calisto
Pro Series

Installing the Handset Battery

1. Place the battery for the handset into battery compartment.
2. Plug the battery pack connector into the white jack inside the handset.
3. Slide the battery cover onto the handset and place the handset onto
the base to charge it. The screen may take up to 10 minutes to show
charge indicator.
2
To remove battery door,
press firmly

Charging the Handset and Headset

To charge headset, press firmly onto the
charging connector until click is heard
and headset light turns solid red.
Handset Charging time: 16 hours minimum before first time use, or
until the full battery icon
hand corner of screen.
Headset 1. Place the headset onto the base as shown above.
Press down firmly to begin charging. The headset
indicator should light up solid red while charging, and
solid blue when fully charged in the base.
2. Charging time: 3 hours minimum before first time use,
or until the headset indicator turns solid blue.

Using the Headset and Handset

Using Your Headset for the First Time

The headset automatically powers on when it is charging. It is not
recommended to power it off between uses unless you are away from
home and want to save battery power.
Powering headset: Power up by pressing and holding the Headset button
for 2 seconds. Power off by pressing and holding the headset button for
4 seconds.
4 ascending beeps Headset is powered on
4 descending beeps Headset is powered off
is displayed in the top right
3