Convenience Features; Troubleshooting - Plantronics T10 User Manual

T10 Final w_warranty 4/20/00

CONVENIENCE FEATURES

REDIAL FEATURE
The base unit will store the last number dialed. The last number
can be automatically redialed by pressing the Redial Button.
FLASH FEATURE
If your telephone service includes call waiting, the Flash Button
allows you to toggle between two calls. When your phone alerts
you to a second call, press the Flash Button
call on hold and to immediately connect you to the second call.
Press the Flash Button again to return to the first caller.
This feature can also be used with most office telephone systems
to transfer a call to another extension. Press Flash to hear a dial
tone, enter the extension number, after the extension rings, press
Flash again or hang up to transfer the call.
MUTE FEATURE
When you activate the Mute Button , the calling party cannot
hear your voice but you will be able to hear the calling party.
TONE FEATURE
The treble and bass quality of the incoming call can be adjusted
by moving the Tone Control.
15
4:09 PM Page 18
14
7
to place the current
7
9
8

TROUBLESHOOTING

STEP 1
I CANNOT HEAR A DIAL TONE
Make sure all connections are correct and firmly in place.
Make sure you have pressed the On/Off Button
In-Use Indicator and On Line Indicator Lights
12
Adjust Listen Volume Control.
13
Ensure that Headset is centered on your ear.
Ensure that you have allowed 45 seconds for initialization
following first installation.
I CANNOT DIAL A NUMBER
Make sure Tone/Pulse Switch Setting is correct.
CALLER CANNOT HEAR MY VOICE
Make sure the Mute Button is turned off with the Mute Indicator
9
Light off.
8
Adjust Headset so the microphone is closer to your mouth.
PLANTRONICS HELP DESK
The Plantronics Help Desk is ready to assist you!
Dial 1-800-544-4660 Monday through Friday 8:00 a.m. to 5:00 p.m.
Pacific Standard Time or visit our website at www.plantronics.com.
G
and the
11
are on.
2
5
9