Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Vertiv Liebert MicroPOD 230V
Summary of Contents for Vertiv Liebert MicroPOD 230V
- Page 1 Liebert® M icroPO D ™ 230V Installer/User Guide...
- Page 2 Technical Support Site If you encounter any installation or operational issues with your product, check the pertinent section of this manual to see if the issue can be resolved by following outlined procedures. Visit https://www.VertivCo.com/en-us/support/ for additional assistance.
-
Page 3: Table Of Contents
5.1 Pluggable Connections 6 Indicator Lam ps 6.1 Mains Indicator Lamp 6.2 UPS Indicator Lamp 7 O peration 7.1 Transfer to Maintenance Bypass 8 Specifications 9 Troubleshooting 9.1 Product Warranty Registration V ertiv | Vertiv Liebert® MicroPOD ™ Installer/User Guide |... - Page 4 V ertiv | Vertiv Liebert® MicroPOD ™ Installer/User Guide |...
-
Page 5: Important Safety Instructions
U PS. C A U TIO N : For use in a controlled environm ent. Refer to m anual specifications for environm ental conditions. V ertiv | Vertiv Liebert® MicroPOD ™ Installer/User Guide |... - Page 6 W A RN IN G ! W hen the Liebert M icroPO D is in m ains position (m aintenance bypass m ode), the pow er to the connected load is not filtered or conditioned by the U PS. V ertiv | Vertiv Liebert® MicroPOD ™ Installer/User Guide |...
-
Page 7: Lossary Of Sym Bols
MAINS lamp indicates local power is available and the load may be transferred to bypass the UPS. UPS lamp indicates UPS power is available and the load may be transferred to the UPS to provide computer-grade power to the load. V ertiv | Vertiv Liebert® MicroPOD ™ Installer/User Guide |... -
Page 8: Introduction And System Description
Liebert MicroPOD. N O TE: Battery backup and conditioned pow er are N O T available during the M ains m ode of operation. V ertiv | Vertiv Liebert® MicroPOD ™ Installer/User Guide |... - Page 9 Table 3.2 M ains M ode D escription ITEM D ESC RIPTIO N Utility Connected Load • The UPS may be turned off and removed without affecting the load. See Figure 3.3 on the facing page. V ertiv | Vertiv Liebert® MicroPOD ™ Installer/User Guide |...
- Page 10 UPS Input - Connect to load receptacle on rear of UPS Connect Loads Output Circuit Breaker Power Indicator Lamps Connect UPS Input Cord Utility Input - Connect to Mains Wall Receptacle Connect Loads Rotary Switch V ertiv | Vertiv Liebert® MicroPOD ™ Installer/User Guide |...
-
Page 11: Installation
Table 4.1 A ttaching Liebert M icroPO D to U PS w ith Securing Brackets D escriptions ITEM D ESC RIPTIO N Step 5 - Attach bracket to rear of UPS Step 6 - Attach Liebert® MicroPOD to brackets Liebert® MicroPOD V ertiv | Vertiv Liebert® MicroPOD ™ Installer/User Guide |... -
Page 12: Rack Mount Installation
C A U TIO N : Before installing, open all branch rated circuit breakers at the nearest disconnect, turn U PS off and disconnect all cords to and from the U PS. V ertiv | Vertiv Liebert® MicroPOD ™ Installer/User Guide |... - Page 13 This page intentionally left blank. V ertiv | Vertiv Liebert® MicroPOD ™ Installer/User Guide |...
-
Page 14: Startup Procedure
MAINS to UPS. The load is now being supplied with conditioned power through the UPS. 8. Before any operation or procedure, always verify that both the UPS lamp (green) and the Mains lamp (amber) are illuminated before changing the rotary switch. V ertiv | Vertiv Liebert® MicroPOD ™ Installer/User Guide |... -
Page 15: Indicator Lamps
Figure 7.1 Indicator lam ps on Liebert M icroPO D Table 7.1 Indicator Lam p D escriptions ITEM D ESC RIPTIO N Green lamp: Output Power Available from UPS Rotary Switch Amber Lamp: Mains Power Present V ertiv | Vertiv Liebert® MicroPOD ™ Installer/User Guide |... -
Page 16: Peration
2. Transfer the rotary switch from UPS to MAINS, provided the Mains lamp is illuminated on the Liebert MicroPOD. 3. Turn the UPS off. 4. Disconnect the two cables connecting the UPS to the Liebert MicroPOD. 5. The UPS is prepared for servicing. V ertiv | Vertiv Liebert® MicroPOD ™ Installer/User Guide |... -
Page 17: Specifications
-4°F to 140°F (-20°C to +60°C) Humidity 0 to 95% non-condensing Agency/Standards UL 1778, c-UL, ISTA Procedure 1A This Liebert MicroPOD is intended for use with a UPS meeting all the following requirements: V ertiv | Vertiv Liebert® MicroPOD ™ Installer/User Guide |... - Page 18 UPS output cord is compatible with the rating and type of receptacle on the Liebert MicroPOD labeled UPS. • Available mains receptacle is compatible with the Liebert MicroPOD input power connector labeled MAINS. V ertiv | Vertiv Liebert® MicroPOD ™ Installer/User Guide |...
-
Page 19: Troubleshooting
Liebert MicroPOD receptacles. 9.1 Product W arranty Registration To register for warranty protection, visit the Quick Links section of the Vertiv™ site at: http://www.VertivCo.com Click on Product Warranty Registration and complete the form. If you have any questions, contact Vertiv™ Channel Support at:... - Page 21 Vertiv.com | Asia Pacific © 2023 Vertiv Group Corp. All rights reserved. Vertiv™ and the Vertiv logo are trademarks or registered trademarks of Vertiv Group Corp. All other names and logos referred to are trade names, trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness here, Vertiv Group Corp.
Need help?
Do you have a question about the Liebert MicroPOD 230V and is the answer not in the manual?
Questions and answers