Table of Contents
Advertisement
MA-1000
The control unit must be installed to the wall so as to allow a clear view of the display
and easy access by the operator. For example, it allows an optimal view of the display
at 1,5 m height.
The control unit is designed to be installed to the wall using plastic wall plugs and 4
screws of max. 5 x 50 mm (masonry walls) or self-tapping screws (prefabricated
panels).
It is recommended not to install the panel near heat sources (radiators, etc.)
Use screws of max. 5 mm.
Moreover, if the control unit must be installed to the wall beside a corner wall, the
minimum distance from the latter must be at least 200 mm, to allow for opening of the
front panel.
11
M-167.1-MA1000-EN / 02.2023
Advertisement
Table of Contents
