Changing Stored Analogue Channels - Beko 65 BLE 7530 BP Operating Instructions Manual

SPECIAL­SETTINGS
Note:
The search can be ended prematurely with
7
»EXIT«.
8 Press »
« (yellow) to switch to the Chan-

nel Editor;
or
press »EXIT« to end the setting.
Tuning­the­analogue­television­
channels­by­entering­the­channel­
numbers
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with
»OK«.
3 Select the menu item »Source Setup« with
> <
» « or » « and press »OK« to confirm.
– » Source Setup« menu is displayed.
4 Select the line »Manual Channel Search«
with » « or »
V Λ
firm.
5 Select the option »Air« or »Cable« with »
>
or » « and confirm the source you are re-
ceiving analog broadcast from by pressing
»OK«.
6 Select the option »Analog« with »
and press »OK« to confirm.
– M enu is displayed.
Sound Settings
Program No
Quality
System
80
Signal Strength
Band
60
Channel
Frequency (MHZ)
Fine Tuning
7 Select the line »Program No« with »
or » « and press »
Λ
select the preset.
8 Select the line »Band« with »
select »S« (special channel) or »C« (chan-
nel) options press »
90­ ENGLISH
­ - ---------------------------------------------------------------------------------------
« and press »OK« to con-
<
« or »
Source Setup
Parental Guidance
Source Setup
62.25 MHz
01
BG
04
Auto Next
Auto Previous
V
< >
«, » « or »1...0« to
« or »
V Λ
< >
« or » «.
9 Select the line »Channel« with »
To enter the channel number step by step,
press »
»1...0« or
start a automatic scan with »
» « (yellow).

Note:
»The current system is displayed in the »Sys-
7
tem«. If the colour and/or sound is not func-
tioning correctly, select »System« with »
or »
Λ
>
or » «.
When fine tuning is required, select »Fine Tun-
7
ing« with »
>
» «.
10 To save the setting press »
Note:
To set other television channels, repeat steps
7
from 7 to 10.
11 Press »EXIT« to end the setting.
<
«
Changing­stored­analogue­
channels
If channels were stored with the automatic chan-
>
«
nel search during the tuning of the television
channels, you can delete them. You can also
change or enter the name of a channel and skip
a channel.
Selecting­channel­lists
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with
C
»OK«.
3 Select the menu item »Source Setup« with
0
>
» « or »
Back
4 Select the line »Channel Editor« with »
or »
Λ
«
– » Channel Editor« menu is displayed.
Note:
Additional operations are explained in the
7
«. To
following sections.
< >
« or » « or enter it directly with
. Select the required setting with »
« or » « and tune with »
V Λ

<
« and press »OK« to confirm.
« and press »OK« to confirm.
« or » «.
V Λ
« (green) or

«
V
<
«
<
« or
« (blue).
«
V