What Is Common Interface; Inserting The Ca Module; Access Control For Ca Module And Smart Cards - Beko 65 BLE 7530 BP Operating Instructions Manual

OPERATION­WITH­COMMON­INTERFACE
What­is­common­interface?
Common Interface (CI) is an interface for DVB
7
receivers.
E ncrypted channels can only be viewed with a
7
CA module suitable for the encryption system
and the corresponding smart card.
The television set is equipped with a Common
7
Interface slot into which CA modules from vari-
ous providers can be inserted.
You can insert the provider's smart card into
7
the CA module in order to enable the en-
crypted channels you want to see.
Inserting­the­CA­module
Note:
Switch off the device before inserting the CA
7
module in the »CI1« or »CI2« slot.
1 Insert the smart card into the CA module.
2 Insert the CA module with the smart card
into the »CI1« or »CI2« slot on the televi-
sion.
Note:
To see which CA module is in the Common
7
Interface slot, go to the »CA - Module« sub-
menu.
When you insert a CA module into the CI
7
slot on the television for the first time, wait
a few moments until the television has regis-
tered the CA module.
82­ ENGLISH
Access­control­for­CA­module­
and­smart­cards
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with
»OK«.
3 Select the menu item »Source Setup« with
> <
» « or » « and press »OK« to confirm.
– » Source Setup« menu is displayed.
4 Select the line »Advanced« with »
» « and press »OK« to confirm.
Λ
5 Select the line »CA–Module« with »
» « and press »OK« to confirm.
Λ
Notes:
This menu provides operating instructions
7
and – after you enter your PIN code – ac-
cess to channels of the PAY-TV provider.
The remaining settings are described in the
7
manuals for your CA module and smart
card.
The CA modul is not supported in some
7
countries and regions. Please consult your
authorised dealer.
6 Press »EXIT« to end the setting.
­ - --------------------
« or
V
« or
V