Beko 65 BLE 7530 BP Operating Instructions Manual page 74

USING­EXTERNAL­DEVICES
Device­Control
You can determine how the remote control of
your television will control the external device.
1 Press » « and use »
either one from »HDMI1« to »HDMI4« and
press »OK« to confirm.
2 Open the menu with »MENU«.
3 Activate the menu item »Settings« with
»OK«.
4 Select the menu item »Source Setup« with
> <
» « or » « and press »OK« to confirm.
– » Source Setup« menu is displayed.
Sound Settings
Device
Remote Behavior
Put device into standby
5 Select the line »Remote Behavior« with »
or » «.
Λ
6 Select control type (»Pass-Through«, »Deck«
or »Zap«) with »
Notes:
»Pass-Through« is included in the menu as an
7
option that can be selected in every device
type. »Deck Control« and »Tuner Control«
options change depending on the external
device connected.
Apply trial and error method to determine
7
the functions of the remote control buttons for
the selected control type.
Refer to the user manual of the DIGILINK
7
compatible device for its functions.
7 Press »EXIT« to end the setting.
74­ ENGLISH
< >
« or » « to select
Parental Guidance
Source Setup
BEKO
None
Change Area
< >
« or » «.
­ - --------------------------------------------------------------
Switching­the­device­to­standby
This option switches the connected external de-
vice to standby.
1 Press »
either one from »HDMI1« to »HDMI4« and
press »OK« to confirm.
2 Open the menu with »MENU«.
3 Activate the menu item »Settings« with
»OK«.
4 Select the menu item »Source Setup« with
>
» « or »
– » Source Setup« menu is displayed.
5 Select the line »Put device into standby«
with »
V
firm.
OK
– T he connected external device is switched
off.
Back
«
V
<
« and use » « or »
<
« and press »OK« to confirm.
« or » « and press »OK« to con-
Λ
>
« to select