Beko 65 BLE 7530 BP Operating Instructions Manual page 24

Table of Contents

Advertisement

SETTINGS
»Perfect Clear« – Improves the general im-
7
age by means of a gentle blue hue (giving
the appearance of greater sharpness) and
improves the black level by setting this entire-
ly to black from specific shade of back. This
reduces the visible grey values in the dark
areas of the picture.
»Film mode« detects and processes feature
7
films automatically for all channel sources.
This means you will always receive an op-
timal picture.
This functions in the modi 480i, 576i and
1080i in TV playback and for other channel
sources.
If the »Film mode« is switched on for pro-
grammes without a feature film signal, minor
problems such as picture freeze, defective
subtitles or fine lines in the picture could oc-
cur.
»MEMC« – Improves the display of moving
7
images through the additional computation
of intermediate pictures and is only avail-
able for devices from 32". It is displayed
with a PPR of 400 (Picture Perfection Rate).
If the adjustment value is too high, this may
result in ghosting with poor transmission due
to the incorrect computation of the intermedi-
ate pictures.
»Nois Reduction« – Reduces the visible
7
'snow' by displaying the picture a little less
sharply and creating a slight blurring.
Should therefore be used minimally with
good picture material.
»Block Noise Reduction« – This function
7
can only be selected with digital reception
sources and AV presets. It reduces any in-
terference from artefacts (pixel blocks) from
digital programmes due to MPEG compres-
sion (such as from DVB-T receivers and lower
transmission rates or DVD players).
24­
ENGLISH
­------------------------------------------------------------------------------------------------------------------
Restore­default­settings
1 In the menu »Picture Setting« select the item
»Restore default display settings« with »
or »
« and press »OK« to confirm.
Λ
2 Press »
« (green) to confirm the security

query;
or
press »
« (red) to cancel the function.
3 Press »EXIT« to end the setting.
«
V

Advertisement

Table of Contents
loading

Table of Contents