Miele G 7856 Operating Instructions Manual page 23

^ Add rinsing agent only until it is
visible on the surface of the filter in
the opening.
^ Close the flap firmly. The flap must
audibly engage, otherwise water
could get into the rinsing agent
reservoir during the programme.
^ Mop up any spilt rinsing agent. This
prevents over-foaming occuring
during the next programme.
The flap should always remain closed.
Only open it to add more rinsing agent.
^ Wait until the H indicator light on the
control panel lights up again before
adding any more rinsing agent.
Adding rinsing agent
23