Headset Controls - Plantronics Explorer 360 User Manual

Turn on the headset
Turn off the headset
Answer a call
Reject a call
End a call or cancel
an outgoing call
Make a call
Adjust the volume
Press and hold the call control button until the
indicator glows blue. You will hear ascending
tones. The indicator then flashes red up to three
times to show the battery charge level.
Press and hold the call control button until the
indicator glows red. You will hear descending
tones. When power is off, indicator stays off.
Briefly press the call control button.
When you receive a call, your phone may ring
before your headset rings. Wait until you hear
the ring in your headset before you press the call
control button to answer the call.
Press the call control button for 2 seconds.
Briefly press the call control button.
Enter number on your phone, press send, and
the call is automatically transferred to headset; no
need to press call control button.
Briefly push up or down on the volume button for
incremental volume steps. You will hear two tones
(high tone followed by low tone) at the volume limit.
WARNiNG: Do not use headphones/headsets
at high volumes for an extended period of time.
Doing so can cause hearing loss. Always listen
at moderate levels. See www.plantronics.com/
healthandsafety for more information on headsets
and hearing.

Headset Controls

7