Advertisement
Communication Products (Pty) Ltd
C
i ti
P d t (Pt ) Ltd
Sole Authorized Importer & Distributor of Plantronics Products since 1990
If you have lost the pairing on your phone with the headset follow these simple steps below:
•
Setting the headset into pairing mode
1) Ensure the headset is fully charged
1) E
th h d t i f ll
2) The headset must be switch off
3) Press and hold the on button for +- 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
•
Searching for the headset on the phone
1) Go to "settings" or "connections"
2) Select Bluetooth, then options
3) Select Devices and click add
4) The phone should search for any available Bluetooth devices and display what was found
4) Th
h
h
5) Select the Explorer 3XX device and click add
6) You will be required to enter in a pass code which is standard '0000'
7) If successful then the headset will start flashing BLUE every few seconds.
8) If it s a Samsung or Nokia phone you will need to AUTHORIZE headset on the device.
8) If it's a Samsung or Nokia phone you will need to "AUTHORIZE" headset on the device.
•
The headset is now paired with the phone.
Pairing Instructions
Pairing Instructions
Explorer 220/340/350/360/370
h
d
ld
h f
il bl Bl
h d i
d di l
h
Email: orders@headsetsolutions.co.za
Email: orders@headsetsolutions co za
www.plantronics.co.za
f
d
Tel: (021) 840 2200
Fax: (021) 840 2251
Advertisement
Table of Contents
Need help?
Do you have a question about the EXPLORER 220 - PAIRING and is the answer not in the manual?
Questions and answers
My bluetooth partially pairs. I can make a call and listen to a message but unable to use blue tooth to hear youtube or messenger voice messages
To fully pair the Plantronics Explorer 220 headset for YouTube and Messenger voice messages, follow these steps:
1. Prepare the Headset for Pairing:
- Ensure the headset is fully charged.
- Turn off the headset.
- Press and hold the power button for about 8 seconds until the light flashes red and blue. The headset is now in pairing mode.
2. Pair with Your Phone:
- Go to your phone’s Settings or Connections menu.
- Select Bluetooth, then Options.
- Choose Devices and click Add.
- Your phone will search for available Bluetooth devices.
- Select Explorer 3XX from the list and click Add.
- Enter the passcode 0000 when prompted.
- If pairing is successful, the headset will flash blue every few seconds.
Once paired, the headset should work for YouTube audio and Messenger voice messages, provided Bluetooth audio is enabled in your phone's sound settings.
This answer is automatically generated