Headset Controls; Range; Indicator Lights - Plantronics Explorer 230 User Manual

Headset Controls

Transfer a call from Press and hold the call control button until you
headset to phone hear a short, low tone.
Transfer a call from Press and hold the call control button until you
phone to headset hear a short, low tone.

Range

To maintain a connection, keep your headset within 33 feet (10 meters)
of the Bluetooth device. If there are obstacles between your headset and
the device, you may experience interference. For optimal performance,
place your headset and phone on the same side of your body.
Audio quality degrades as you move out of range. When you are far
enough away to lose the connection, you hear a high tone in the headset.
The headset attempts to reconnect after 30 seconds. If you move back
in range, you can manually reconnect by pressing the call control button.
NOTE Audio quality is also dependent upon the device with which the
headset is paired.
8
Headset Status Headset Indicator Light
Powering on Steady Blue.
Powering off Red appears and goes off.
Standby Blue flashes.
Charging battery Red solid light.
Low battery Triple red flashes,
Pairing mode Blue/red flashes.
Missed call Purple flashes. Single press the call control
button to cancel.
In coming call Triple blue flashes. Briefly press call control
button to answer the call. Press call control
button for 2 seconds to reject the call.

indicator Lights

9