Creating a network
What is a network
the network is a group of tubes and sensors that form a connected system. It is controlled by
one master sensor
All the tubes in a network will react in the same way.
If you want to have different behaviors of the tubes in one area you have to create different
networks.
One network in one area
Multi networks in one area
SubstiTUBE ® Connected System UI extend version
Master sensor
Slave sensor
LED tube
LEDVANCE GmbH, Parkring 29 – 33, 85748 Garching
•
In one network, tubes are behaving the same.
•
If one of the sensor in the network is detecting the
motion and ambient light is below threshold all the tubes
react
•
If you want to have muti networks in one area
each network has to be powered on separately
during installation.
•
If unpaired tubes and sensors of another intended
network are powered on during the installation of the
first network they may join the wrong network
•
Close the pairing of network1 and wait for 3min
before start pairing network 2.
otherwise network 2 may join network1
4