1. Align and replace the 4-cell battery into the computer chassis.
2. Route the battery cable through the routing channels between the system board and 4-cell battery.
3. Affix the adhesive tapes to secure the 4-cell battery to the computer chassis.
4. Replace the five screws (M2x3) to secure the 4-cell battery in place.
5. Connect the battery cable to the system board.
1. Install the
palmrest and keyboard
2. Follow the procedure in
Power-adapter port
Removing the power-adapter port
1. Follow the procedure in
2. Remove the
palmrest and keyboard
The following image indicates the location of the power-adapter port and provides a visual representation of the removal
procedure.
assembly.
after working inside your
before working inside your
assembly.
computer.
computer.
Removing and installing components
33