1. Peel off the tape from the left hinge that secures the display cable.
2. Peel off the tape from the right hinge that secures the WLAN antenna cables.
3. For laptops, remove the two (M2x2.5) screws and four (M2.5x2.5) screws that secure the display hinges to the display
assembly.
4. For 2-in-1 computers, remove the six (M2.5x2.5) screws and four (M2x2) screws that secure the display hinges to the
display assembly.
5. Open the display hinges to 45 degrees.
76
Removing and installing components