Display Cosmetics; Black Display Picture Mode; White Display Picture Mode - Planar LC08 Product Specification

Section 7 – Display Cosmetics
The external visual inspection shall be conducted with the unaided eye at a minimum of 35 cm [14in] from the
display surface. There are acceptable defects when the Display is in the Black Mode and in the White Mode.
7.1

Black Display Picture Mode

•
Power up the Display. Display an all black screen via the video input.
•
The LCD Panel is acceptable if there are 15 or less green, red, and blue dots
visible from 35cm [14in] with the unaided eye.
•
The LCD Panel is acceptable if no more than 5 dots are joined.
7.2

White Display Picture Mode

•
Power up the Display. Display an all white screen via the video input.
•
The LCD Panel is acceptable if there are 10 or less black dots visible from 35c
[14in] with the unaided eye..
•
The LCD Panel is acceptable if no more than 3 dots are joined.
Title: Product Specification – LC08 High-Bright Monitor
Document Number: 023-0283-00
Page 20 of 26
Rev C