Ingersoll-Rand 5R Series Maintenance Information
Hide thumbs
Also See for 5R Series:
- Maintenance information (9 pages) ,
- Product information (56 pages) ,
- Product information (56 pages)
Subscribe to Our Youtube Channel
Related Manuals for Ingersoll-Rand 5R Series
Summary of Contents for Ingersoll-Rand 5R Series
- Page 1 16572596 Edition 3 May 2014 Air Drill 5 and 5R Series Maintenance Information Save These Instructions...
- Page 2 Product Safety Information WARNING WARNING Failure to observe the following warnings, and to avoid these potentially hazardous situations, could result in death or serious • injury. • Read and understand this and all other supplied manuals before installing, operating, repairing, maintaining, changing accessories on, or working near this product.
- Page 3 8. When inserting the assembled Throttle into the Motor Housing, Needle Bearing inserting Tool align the flat on the Trigger with the flat on the Bushing and insert the assembly into the throttle hole with the flats closest to the body of the Housing. 9.
-
Page 4: Troubleshooting Guide
assembly into the Ring Gear (36) and slide it into engagement with the Rotor Pinion. Slip the Gear Head Spacer (41) over the spline on the Gear Head. NOTICE For N ratio, a Gear Head Planet Gear (40) has 13 teeth and a Spindle Planet Gear (47) has 14 teeth. Do not mix, mismatch or switch locations with these small gears when reassembling a Tool. - Page 5 Notes:...
- Page 6 Notes:...
- Page 7 Notes:...
- Page 8 ingersollrandproducts.com © 2014 Ingersoll Rand...
Need help?
Do you have a question about the 5R Series and is the answer not in the manual?
Questions and answers