Ingersoll-Rand 33 Series Maintenance Information
Hide thumbs
Also See for 33 Series:
- Installation instructions manual (8 pages) ,
- Installation instructions (2 pages) ,
- Product information (60 pages)
Related Manuals for Ingersoll-Rand 33 Series
Summary of Contents for Ingersoll-Rand 33 Series
- Page 1 16596199 Edition 2 May 2014 Air Drill 33 Series Maintenance Information Save These Instructions...
-
Page 2: Product Safety Information
Product Safety Information WARNING Failure to observe the following warnings, and to avoid these potentially hazardous situations, could result in death or serious • injury. • Read and understand this and all other supplied manuals before installing, operating, repairing, maintaining, changing accessories on, or working near this product. -
Page 3: Governor Adjustment
Assembly General Instructions The correct governed free speeds for these Models are: Speed 1. Always press on the Inner ring of a ball-type bearing when Model installing the bearing on a shaft. 33H, 33H-EU, 33H51 and 33H51-EU 2. Always press on the outer ring of a ball-type bearing when 33J, 33J-EU, 33SJ, 33SJ-EU, 33J51 and 33J51-EU pressing the bearing into a bearing recess. -
Page 4: Troubleshooting Guide
Troubleshooting Guide Trouble Probable Cause Solution Low power or low Dirty Inlet Bushing or Air Strainer Screen Using a clean, suitable, cleaning solution in a well-ventilated area, clean the Air free speed and/ or Muffler Screen Strainer Screen and Muffler Screen. Allow to air dry. Worn or broken Vanes Replace complete set of Vanes. - Page 5 Notes:...
- Page 6 Notes:...
- Page 7 Notes:...
- Page 8 ingersollrandproducts.com © 2014 Ingersoll Rand...