Nortel 1230 User Manual page 123

Viewing active conferees
Use the following procedure to view active conferees.
ConfDsp
(Goodbye)
Disconnecting a conferee
Use the following procedure to disconnect a conferee.
ConfDsp
Operating your IP Phone 1230
1. During a conference call, press the
Confdsp key to turn on the LCD
indicator. Each key press changes the
screen to show a different active
conferee.
This action has no effect on the display
of other IP Phones involved in the
conference.
2. Press the Goodbye
If configured, the
Display returns an updated count of
conferees. The LCD indicator turns off.
1. During a conference call, press the
Confdsp key until the conferee to
disconnect appears on the screen.
2. Press the DN
conference call is established.
key.
Conference Count
key on which the
123