Parking a call using the SPRE code or FFC
To park a call using the SPRE code or FFC, perform the following
procedure.
Trans
or
Trans
or
Retrieving a parked call
Use the following step to retrieve a parked call.
Note: When Call Park is configured network-wide, you can use this
feature across networks. You can configure a System Park extension
to automatically park most calls.
1. Press the
Conf
Press the
2. Dial the
3. To use an alternative DN from the
System Park
the DN where you want to park the call.
Otherwise, proceed to step 4.
4. Press the
Conf
Press the
1. Lift the handset.
Operating your IP Phone 1230
Trans
soft key.
or
Conference
soft key.
Call Park
FFC.
DN or your own DN, dial
Transfer
soft key.
or
Conference
soft key.
113