Pioneer PDP-505HD Operating Instructions Manual page 49

SAT control buttons
CABLE and SAT cannot be selected at the same time.
When SAT is preset by "Remote code set up", the
remote control unit buttons will function as shown below.
÷ When a satellite broadcast tuner is connected to this
unit, press the input selector button that has the same
number as the connected input terminal and set the
mode switch to CBL/SAT. The tuner can be operated
using buttons 1 to 8.
÷ Satellite broadcast tuners which are made by other
makers and are not preset can also be operated with
the remote control unit if buttons 1 to 8 have learnt
the functions (page 41).
1
Direct channel selection buttons
Press the button (or buttons) that corresponds to the
channel that you wish to watch.
2
CH (Channel) +, – buttons
Press plus (+) or minus (–) to tune in a higher or lower
channel.
3
SOURCE POWER button
Turns the power of the SAT (digital satellite system
tuner) on and off.
TV CBL DTV DVD
/VCR /SAT /LD
STANDBY/ON
INPUT
1 2 3 4
SCREEN
MODE AUTO STILL DISPLAY
POWER INPUT
RECEIVER DTV
VIEW
AUDIO CC CLEAR MODE
1 2 3
1
4 5 6
7 8 9
0 CH
¶
ENTER
CH
RETURN
2
CH VOL
MUTING
RECEIVER
EDIT/
TV/SAT/DTV/DVD
LEARN MENU
SOURCE SAT/DTV
%
3
POWER GUIDE
SET/
SELECT
DVD
TOP MENU (SAT) /DTV
%
MENU INFO
FAVORITES
1 7 3 ¡
VCR REC
8 ¶ 4 ¢
Î
CU-PDP008
PLASMA DISPLAY REMOTE CONTROL UNIT
4
Select/Set buttons (SET/SELECT, 2, 3, 5, ∞)
2, 3, 5, ∞: Press the button to select items on the
SAT GUIDE screen or SAT menu screen.
SET/SELECT: Press to activate the selected function.
5
CH ENTER button
Fix the selected channel with the direct channel
selection buttons.
÷ This button is not preset. Use this button to learn if
6
SAT MENU button
When this button is pressed, the satellite broadcasting
menu will be displayed.
7
SAT GUIDE button
When this button is pressed, the satellite broadcasting
guide screen will be displayed.
8
(SAT) INFO button*
When this button is pressed, information on satellite
broadcasting will be displayed.
* (SAT) INFO button has no remote control signals preset. Learn
the operation if necessary.
R C
EMOTE ONTROL
Mode switch
5
6
7
4
8
necessary.
U F
NIT UNCTIONS
45
<ARE1349> En