RF SOLUTIONS 118 Series Quick Start Manual

Table of Contents

Download this manual

NOTE: Installation should be by a qualified electrician

Installation:

Remove the back cover to

expose the PCB and Screw

Terminals Connections

For full details on the 118 series, please visit www.rfsolutions.co.uk for the complete

118 Series KEELOQ Control

datasheet.

Quick Start Guide

Open the case by removing

the corner cover caps and

unscrewing

Feed cables through the

gland provided

118-4

Table of Contents

Do you have a question about the 118 Series and is the answer not in the manual?

Page 1 Remove the back cover to expose the PCB and Screw Terminals Connections Feed cables through the gland provided Wiring Example for 12Vdc switched load Wiring Example for 230Vac switch For full details on the 118 series, please visit www.rfsolutions.co.uk for the complete datasheet. 118-4...
Page 2 118 series KEELOQ Remote Control Example shows 12 Vdc wiring Relay connection when Relay connection when OPERATING NOT OPERATING 118-4...
Page 3 118 series KEELOQ Remote Control Pairing a Transmitter Transmitters to receivers Each transmitter has a unique identity, (one of 16 billion possible numbers), the identity number is encrypted and transmitted as a random number that changes on each press of the switch. (the same number is never repeated!).
Page 4 (including liability resulting from negligence or where RF Solutions Ltd was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict RF Solutions Ltd’s liability for death or per-...

Keeloq control