Maintenance Intervals - FLORABEST 297536 Translation Of The Original Instructions

Maintenance intervals

Regularly carry out the maintenance work listed in the "maintenance intervals" table.
Regular maintenance prolongs the life of the equipment. It also gives optimum cutting
performance and avoids accidents.
Maintenance Work
(See "cleaning and
maintenance")
Check and tighten screws, nuts
and bolts
Check the engine oil level/
petrol level and refill with
engine oil/petrol if required
Clean operating elements / the
area around the silencer
Clean the finger protection
Change the engine oil
Replace the air filter
Clean/adjust the spark plug
Replace the spark plug
Check the silencer and spark
b
catcher
Clean the air cooling system
Charge the electric starter
battery
a
Replace more often if there is a high level of dust or heavy dirt
b
See Briggs & Stratton instruction manual
Before
Work
√
√
b
a
a,b
After After
After
1st
8 Hrs.
5 Hrs.
√
√
√
GB IE NI
After
50 Annual
Hrs.
√
√
√
√ √
√
√ √
√ √
√
35