Installing Electric Starter Battery - FLORABEST 297536 Translation Of The Original Instructions

Table of Contents

Advertisement

Available languages

Available languages

GB
IE
NI
4. Completely charging a
depleted battery will take
about one hour.
5. Press the electric starter
battery release button
(10) to remove the battery
pack from the charger.
6. Disconnect the battery
charger from the electrical
outlet
Installing electric
starter battery
(Fig. A, K, L)
Warning! Improper
use of battery and
charger can result in an
electrical shock and fire.
Warning! Keep battery
pack dry. Avoid
exposing battery pack to
rain or wet conditions.
Warning! Do not short
circuit. Never place any
object into the battery
pack terminals.
26
1. Make sure the blade
control bar (2) is released.
2. The battery bay is located
on top of the engine.
Slide in the electric starter
battery (9) until it locks
with an audible "click".
Verify it is securely
installed.
3. To check the electric starter
battery (9) connection
without starting the
engine,
- take out the spark plug
connector,
- ensure oil level is OK,
- pull back on the blade
control bar (2) and hold
it against the upper
handle (1),
- and briefly press the
electric starter push key
(4),
Reconnect spark plug
connector afterwards.
New battery can be
sleep mode.
Recharge it for 10
seconds to wake up.

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Fbme 575 a1

Table of Contents