Maintenance Intervals - FLORABEST FBM 575 B1 Translation Of Original Operation Manual

Maintenance Intervals

Regularly carry out the maintenance work listed in the "maintenance intervals" table.
Regular maintenance prolongs the life of the equipment. It also gives optimum cutting per-
formance and avoids accidents.
Maintenance Work
(See "cleaning and mainte-
nance")
Check and tighten screws, nuts
and bolts
Check the engine oil level/petrol
level and refill with engine oil/
petrol if required
Clean operating elements / the
area around the silencer
Clean the finger protection
Change the engine oil
Replace the air filter
Clean/adjust the spark plug
Replace the spark plug
Check the silencer and spark
catcher
b
Clean the air cooling system
Replace more often if there is a high level of dust or heavy dirt
a
See Briggs & Stratton instruction manual
b
Before


b
a
a,b
After
After 1
5 Hrs.
Work


After After
st
8 Hrs. 50 Hrs.






GB
Annual





19