Table of Contents
Advertisement
7. Dismount the flange-screws of the middle
hinge. Take the freezer door from the lower
door hinge and place it on a padded surface
too.
8. Put the cover caps at the opposite holes.
9. Tilt the device slightly backwards and block it
in this position. Unscrew the feet and remove
the foot bracket and the door hinge by loos-
ening the screws.
10. Unscrew the hinge pin and insert it to the
other side of the door hinge. Screw the foot
bracket and door hinge each at the opposite
sides and screw the feet on again.
Replace the device upright. Insert the freezer door on the lower door hinge pin and fix the door to
the property position.
11. Turn the middle hinge about 180° and trans-
fer it at the opposite side. Put the hinge pin in
the hole of the freezer door and tight the
screws of the door hinge.
Insert the fridge door on the middle hinge pin and fix the door to the property position.
12. Transfer the upper hinge at the opposite side
after you unscrewed the hinge pin and put it
in from the other side of the door hinge
again.
13. Put the hinge pin in the hole of the fridge
door and tight the screws of the hinge. Put
them in point 1 removed device cover on
again, tight the screws and clip the cover
caps on.
Check if the doors are arranged vertical as well as horizontal, so that a smooth opening and closing
of the doors is ensured.
8
Advertisement
Table of Contents
