Table of Contents
Advertisement
PROBLEM
The coffee
is not hot
The coffee
is weak or not
creamy enough
The coffee
is delivered
too slowly or
a drop at a time
Coffee does
not come out
of one or both
of the spouts
The appliance
will not
make coffee
52
TROUBLESHOOTING
POSSIBLE CAUSE
The cups were
not preheated.
The infuser has cooled
down because two to three
minutes have elapsed since
the last coffee was made.
A low coffee temperature
is set.
The coffee is ground
too coarsely.
The coffee is ground
too finely.
The coffee spouts
are blocked.
The appliance has
detected impurities in
its internal circuits.
CLEANING UNDERWAY
displayed on the screen.
WHAT TO DO
Warm the cups by rinsing them with
hot water (Note: you can use the hot
water function).
Before making the coffee, heat the
infuser by rinsing using the rinse function
(see section 'Rinsing the coffee maker').
Set a hotter coffee temperature in the
menu (see section 'Settings').
Turn the grinding adjustment dial one
click counter clockwise towards
the coffee mill is in operation. Continue
one click at a time until you reach the
desired coffee delivery. The effect is only
visible after delivering two coffees (see
section 'Adjusting the coffee mill'). If
coffee is still not to your preference, try
using a different brand of coffee.
Turn the grinding adjustment dial one
click clockwise towards
mill is in operation above figure. Continue
one click at a time until you reach the
desired coffee delivery.
The effect is only visible after delivering
two coffees (see section 'Adjusting the
coffee mill').
Clean the spouts with a toothpick.
Wait for the appliance to be ready for
use again and reselect the required
drink. Contact Customer Care if the
is
problem persists.
while
1
while the coffee
7
Advertisement
Table of Contents
