Table of Contents
Advertisement
1
2
3
4
Replace all components. Reposition the dial (lining up the arrow with the
and reinsert the spout and milk intake tube.
40
CARE AND CLEANING
Remove the milk container from the
thermal casing, holding it by the two
side grips.
Remove the milk spout and intake tube.
Turn the froth adjustment dial clockwise to
the
Ensure there is no milk residue
in the hollow and groove under the dial. If
needed, scrape with a toothpick to remove.
Rinse inside the froth adjustment dial seat
and the milk frother connector hole.
Check that the intake tube and spout are
not clogged.
position and pull off.
INSERT
marker),
INSERT
Advertisement
Table of Contents
