Jung FRWM200 Operating Manual page 67

Alarm forwarding has not yet
taken place
If the alarm forwarding has not yet taken
place, you can stop the alarm directly on
the alarm-triggering device:
f Press the testing / stop button on
the device triggering the alarm.
5 Alarm is stopped and is not forwarded.
Alarm forwarding has already
taken place
If the alarm forwarding has already taken
place in a radio group, and you can iden-
tify the alarm-triggering device, proceed
as follows:
f Press the testing / stop button on
the device triggering the alarm.
5 Alarm on the triggering device and
forwarding devices is stopped.
Operating Manual: FRWM200 - Smoke Alarm Device with Radio Link
EN
If the alarm forwarding has already taken
place in a radio group, and you cannot
identify the alarm-triggering device, pro-
ceed as follows:
(1) Press the testing / stop button on a
device of a subgroup or shared radio
group.
(2) Alarm of the forwarding devices of
this group is stopped.
(3) Follow the same procedure for
other groups.
The alarm of the alarm-triggering
device can only be terminated
directly on the device in question.
Thus the fire location can be
located in case of fire.
(4) Press the testing / stop button on
the device triggering the alarm.
5 Alarm on the triggering device and
forwarding devices is stopped.
67