Maintaining The Filter - LG U9CV2B.AWHEUS Owner's Manual

Maintaining the Filter

Cleaning the Filters
1
Remove the front and rear covers of
the product.
Grab both sides of the top of the
air inlet (cover) from the front of the
product and pull gently to separate it.
• The direction with the LG logo on
the product display is the front of
the product.
Display
Air inlet(Cover)
2
Remove dust surrounding the Ultra-
fine filter with a vacuum cleaner or soft
brush.
CAUTION
• Do not wash the Deodorizing Care filter or
True HEPA filter with water. This shortens
the filter's life.
• Be careful not to damage the ultra fine
filter when using a vacuum cleaner.
• Be careful not to damage the filter if
liquid gets on the filter.
34
Replacing the Filter
1
Remove the front and rear covers of the
product and pull the handle to replace
the filter.
• To avoid polluting the surroundings
when replacing the filter, place
newspaper on the floor before you
remove the filter.
Handle
2
Once you have replaced the filter, turn
off the filter replacement alert.
Reset filter replacement
notification
(Filter replacement notification) on
the status display is canceled and the
replacement notification time is reset.
• Press Auto Fan and Rotation buttons at
the same time for at least 3 seconds.
• Use when replacing with a new filter.
NOTE
• A notification is displayed when a filter
replacement is required.
• When the filter is installed, scratches may
occur on the upper and lower surfaces,
but there is no problem in operation.
EN