Grandstream Networks GRP2612 Administration Manual page 65

Allowed in DND Mode
Paging Barge
Paging Priority Active
Multicast Paging
Codec
Multicast Channel
Number
Multicast Sender ID
Multicast Listening
Settings → Outbound Notification
Action URL
Allow Multicast Paging when DND mode is enabled.
Default Setting is "No".
During active call, if incoming multicast page is higher priority (1 being the
highest) than this value, the call will be held and multicast page will be
played. The default setting is "Disabled".
If enabled, during a multicast page if another multicast is received with higher
priority (1 being the highest) that one will be played instead. The default
setting is "Enabled".
The codec for sending multicast pages, there are 5 codecs could be used:
PCMU, PCMA, G.726-32, G.729A/B, G.722 (wide band), G.723.1. Default
setting is "G.722(wide band)".
Multicast Channel Number (0-50). 0 for normal RTP packets, 1-50 for
Polycom multicast format packets.
Outgoing caller ID that displays to your page group recipients (for multicast
channel 1 – 50).
Defines multicast listening addresses and labels. For example:
•
"Listening Address" should match the sender's Value such as
"237.11.10.11:6767"
•
"Label" could be the description you want to use.
For details, please check the "Multicast Paging User Guide" on our Website.
For detailed instruction for this part, please refer to [OUTBOUND
NOTIFICATION SUPPORT] section in this Administration Guide.
•
Setup Completed
•
Registered
•
Unregistered
•
Register Failed
•
Off Hook
•
On Hook
•
Incoming Call
•
Outgoing Call
•
Missed Call
•
Answered Call
•
Rejected Call
•
Forwarded Call
•
Established Call
•
Terminated Call
•
Idle to Busy
GRP2600 Administration Guide
Version 1.0.5.15
P a g e | 65