Front and left view
1
2
4
3
1. ADF
Lower the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one. This ADF
can be used for two-sided originals.
2. Exposure glass
Place originals face down here.
3. Ventilation holes
Prevent overheating.
4. Main power switch
If the machine does not operate after turning on the operation switch, check if the main power switch is turned
on. If it is off, turn it on. See "Turning On/Off the Power".
5. Control panel
See "Control Panel".
6. Internal tray 1
Copied/printed paper and fax messages are delivered here.
Guide to Components
5
10
6
7
8
9
CAS093
59
2