Manual Control - Miele Profitronic M PW 6131 Programming Instructions Manual

Manual control can be set before a
programme is started or during a
programme stop.
^ Pressing the i "Manual control" button
takes you to the password screen.
Password: _ _ _ _
ABCDEFGHIJKLMNOPQRSTUVWXYZ
0123456789
i
After entering the password the manual
control screen will appear.

Manual control

Level: 0 mm
rpm: no
p ß XY
This display shows the current level, rpm
and temperature in the machine.
The function buttons have specific manual
controls allocated to them here.
Water inletp, Dispensingß, Washing and
heating XY, Drain with drum rotation XZ,
Spin u.
^ Pressing the relevant button again
deselects the function.
Pressing the f "Stop/End" stops the
selected function and pressing it again takes
you out of manual control.
M.-Nr. 06 533 430
S A
Temp: 22 °C
ZX u f
Water inlet p
The water inlet valves and the water level
can be set.
^ Press the "Water inlet" p button.
Manual control ~ Water inlet
Valve: KH
Level: 100 mm
^ Press the rotary dial to select "Valve".
Manual control ~ Water inlet
Valve: KH
Level: 100 mm
^ Turn the rotary dial to find the valve you
want and then press it to confirm your
selection.
Manual control ~ Water inlet
Valve: KH
Level: 100 mm
^ Turn the rotary dial to "Level" and then
press it to confirm your selection.
^ Turn the rotary dial to find the level you
want and then press it to confirm your
selection.
^ After selecting the valve and the level
pressing the "Start" h button will start the
water intake.
The water intake stops once the set level has
been reached or if the p button is pressed
again.
Manual control
A
A
A
43