Table of Contents
Advertisement
Welding
Current
control
Welding
Mode
Selector
Grounding
cable
POWER INDICATOR
When the machine is turned on, the power indicator will be lit.
ALARM INDICATOR
When the thermal indictor is lit, it shows that the machine is overloaded and that the internal temperature
is too high. Welding output will turn off automatically, but the fan will still be working. When the internal
temperature is decreased, the overload light will turn off and the machine will be ready to weld.
WELDING CURRENT CONTROL
Welding current (amperage) control is placed on the front panel of machine.
WELDING CABLE
The welding cable is attached to electrode to complete the circuit, allowing the flow of current needed
to weld.
GROUNDING CABLE
The ground cable/clamp is attached to the workpiece to complete the circuit, allowing the flow of
current needed to weld.
Getting to Know your Welder
Power
Indicator
Welding
cable
Power Switch
Power Cord
Alarm
Indicator
Welding
Mode
Indicator
11
Advertisement
Table of Contents
