Product Features; Charging The Battery - Black & Decker 42966833 Instruction Manual

1. On/off switch
2. Bowl release button
3. Charging indicator
4. Dust bowl
5. Nozzle
6. Nozzle release button
7. Nozzle rotating button
8. Extendable crevice tool
9. Flip-up Brush
10. Charger base
11. Charger
12. Cloth filter
13. Plastic pre-filter
• Place the appliance on the charging base as shown.

Charging the battery

• Plug in the charger. The charging indicator will flash
continuously (slowly).
• Leave the appliance to charge.
While charging, the charger may get warm, this is
perfectly normal and safe. The charging indicator will
be lit as long as the appliance is connected to the
plugged-in charger. It can remain on charge indefinitely
without damage or danger. It is not possible to
"overcharge" the battery cells with the charger
provided.
WARNING:
below 39°F (4°C) or above 104°F (40°C).
The charge is complete when the charging indicator lights continuously. The charger
and the battery can be left connected indefinitely with the LED illuminated. The LED
will change to flashing (charging) state as the charger occasionally tops off the battery
charge.
• Charge discharged batteries within 1 week. Battery life will be greatly diminished if
stored in a discharged state.
If the appliance detects a weak battery, the charging indicator will flash at a fast rate.
Battery diagnostics
Proceed as follows:
• Place the appliance on the charging base.
• Plug in the charger.
• Leave the appliance to charge.

Product Features

Do not charge the battery at ambient temperatures
4
A