Black & Decker 42966833 Instruction Manual page 6

Removing the dust bowl and filters (figures E, F, & G)
WARNING:
re-usable and should be cleaned regularly.
• Press the release latch and pull the dust bowl
straight off.
• While holding the dust bowl over a bin or sink,
pull out the filter to empty the contents of the
bowl.
• To replace the dust bowl, place it back onto the
handle until it "clicks" firmly into position.
WARNING:
appliance without the filters. Optimum dust collection will only be achieved with clean
filters.
Pre-filter (figure F)
The Pre filter and Pre Filter Housing can be
separated to allow better cleaning.
• Twist the Pre Filter (F1) in a clockwise direction
and lift from the Pre Filter Housing (F2)
Quick clean filter (figure G)
• Lift the filter cleaning handle.
• While holding the quick clean filter housing
(G1), turn the filter cleaning handle (G2) to
perform a quick clean of the filter.
• Pull the filter out of the quick clean filter
housing for more thorough cleaning.
Cleaning the dust bowls and filters
• The dust bowls and filters can be washed in warm soapy water.
• Make sure that the filters and the dust bowl are dry before re-fitting.
The filters are
Never use the
6
E
F
G
F F 1 1
F F 2 2
G G 1 1
G G 1 1