Intended use Have any damaged or defective parts repaired or replaced by an authorised Your Black & Decker Dustbuster hand ® repair agent. held vacuum cleaner has been designed Regularly check the charger lead for for light dry vacuum cleaning purposes.
Page 5
Installation The unit must be disconnected from the mains supply and NV24XXY/NV36XXY/NV48XXY/ taken to an authorised service NV60XXY/NV72XXY - Fitting centre for repair. the charging base to the wall (fig. B1 & B2) The charger is intended for indoor use only. The charging base can be placed on a worktop or fitted to the wall to provide Read the manual carefully...
Leave the appliance to charge for at Refit the dust bowl onto the least 16 hours. appliance. Make sure the dust bowl clicks into place. NV19XXY (fig. B3) Warning! Never use the appliance Make sure that the appliance is without the filters.
from the motor and switch module. nos. 000 541 230 & 000 540 752 Place the battery in suitable DUSTBUSTER is a registered trade packaging to ensure that the mark of the Black & Decker Corporation. terminals cannot be short-circuited.
Page 8
If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to ensure minimum inconvenience to the customer unless: The product has been used for trade,...