Table of Contents
Advertisement
CHANGING THE SAW BLADE
Step 1 Put the table back to the level position if it has been
tilted. Set the upper blade guide assembly approximately
midway in the throat. Open the top and bottom wheel doors,
remove the mitre fence assembly and remove the table insert,
see figs 87.
Fig 87
Step 2 Remove the table alignment pin handle (13), release
the blade tension by pulling the quick release lever towards
you, see fig 88-89, the blade can be easily slipped off the
wheels. Remove the blade carefully, 'wiggling' it clear of the
upper and lower blade guards and out through the slot in the
table, see fig 90.
Fig 88-89
Tension released
WARNING! BE VERY CAUTIOUS WHEN
YOU 'UNFOLD' THE BLADE; IT TENDS TO
'SPRINGS' OPEN, THAT COULD CATCH
YOU UNAWARES!
30
Fig 90
Advertisement
Table of Contents
