Safety Instructions - TCi F10A Manual

2.3 Safety Instructions

Explanation of WARNING Symbols
!
Safety instructions [ According to protection class,
1)
1) Read these instructions carefully and keep this information in a safe place.
2) Follow all warnings and instructions.
3) Do not use the device near water or moisture.
4) Heed all cleaning instructions. Do not block any ventilation openings.
5) Keep the device free from moisture, excessive dust and heat sources such as heating
elements, heat storage tanks, ovens or other heat-generating devices (including amplifi ers).
6) Do not remove the back cover. There are no parts within the device that require adjustment by
the user.
2)
7) Suitable cabling should only be attached by an electrician.
8) Pay heed to the labeling of the connectors for a correct wiring.
9) Only use cables, connectors, attachments and accessories that are part of the delivery or
specifi ed by the manufacturer. Provided power supplies are only suitable for commissioning
and not for continuous use!
10) Only use built-in boxes specifi ed by the manufacturer, or sold with the device.
11) Disconnect the device from the mains when a thunderstorm is expected or if the device will not
be used for a longer period of time.
12) All repairs should be carried out by trained service personnel only. Servicing may
required if the device has been damaged in any way, such as power supply cord
plug damage, liquid has been spilled or objects have fallen into the device, the
device has been exposed to rain or moisture, does not operate normally, or has been dropped.
13) Do not allow any liquids to touch the device, including droplets or sprays. Do not place any
objects with liquid on the device.
14) This manual contains corresponding warnings of electric shock.The device must be mounted
on the wall in accordance with the manufacturer's instructions.
15) Wall or ceiling assembly: When mounting the product on a wall or ceiling, be sure to install the
product according to the method recommended by the manufacturer. Only use the mounting
hardware recommended by the manufacturer. This is an important safety information.
16) An easily accessible disconnector must exist outside of the equipment for this device.
Examples of disconnectors are two-pole switches or circuit breakers.
Ludwig-Rinn-Straße 10-14 • D- 35452 Heuchelheim/Giessen • Phone: +49 6 41-9 62 84-0 • Fax: +49 6 41-9 62 84-28 • www.tci.de
Page 18 of 30
Dangerous voltage:
row at the end, placed
sulated, dangerous
cause electric shock.
Note: an exclamation
portant operating and
1)
the lightning symbol
within a triangle,
voltage within the
point inside a
servicing information
building automation systems only]
2)
1)
with an ar-
indicates non-in-
product, which may
triangle indicates im-
for your device.
2)
be
or