Replacing The Top I/O-Panel; Procedure; Post-Requisites - Dell XPS 8920 Service Manual

Replacing the top I/O-panel

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Align the screw holes on the top I/O-panel with the screw holes on the chassis.
2 Replace the screws that secure the top I/O-panel to the top chassis.
3 Route the I/O-panel cables through the routing guides on the chassis.
4 Connect the top I/O-panel cables to the system board.
For more information, see

Post-requisites

1 Replace the top
2 Replace the front
3 Follow the procedure from step 9 to step 10 in
unit".
4 Replace the right-side
88
computer. After working inside your computer, follow
After working inside your
"System-board
cover.
bezel.
cover.
computer. For more safety best
components".
"Replacing the power-supply
Before
www.dell.com/