I/O Port; O Connector; Connection Of I/O Port; Characteristics Of Inputs - Advantech SmartFlex SR307 User Manual

5.9.9 I/O Port

Panel socket 6-pin.
Pin
1
2
3
4
5
6
The I/O user Interface is designed for the processing of binary input and control (setting)
of binary output. Binary output is open in the default configuration. The isolation strength is
1.5 kV. The pins are isolated from each other with the same strength.
The input circuits are bipolar and allow connection as needed with common plus or minus
(according to the connection of an external voltage).
Binary inputs

• Characteristics of inputs:

Logical 0 / 1
log. 1 max
log. 0 min
log. 0 type
log. 0 max
The binary input status in the Shell is returned via io get bin0 or io get bin1 .
Signal mark Description
IN0 Binary input 0
IN0 Binary input 0
IN1 Binary input 1
IN1 Binary input 1
OUT Binary output
OUT Binary output
Table 16: Connection of I/O port
Figure 37: I/O connector
Voltage Current
3 V 0.4 mA
5 V 0.7 mA
12 V 2 mA
60 V 7 mA
Table 17: Characteristics of inputs
29
SmartFlex SR307
Web interface status
Off
On
On
On