Mocka Hudson Assembly Instructions

Kids chair

Hide thumbs Also See for Hudson:

Table of Contents

Download this manual

Hudson

Kids Chair

Thank you for your purchase.

Please follow the instructions below for correct assembly

24x

bolt

locking nut

Hardware Supplied

Once fully assembled please ensure all legs are sitting ﬂush

against the chair underside to ensure stability.

Do not over-tighten bolts.

The recommended age for this set is 2-6 years.

To ensure longevity of the wood please use a damp cloth only

for cleaning. Avoid use of household cleaners.

Phillips screwdriver

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008

dowel

alien key

Table of Contents

Do you have a question about the Hudson and is the answer not in the manual?

Page 1 The recommended age for this set is 2-6 years. To ensure longevity of the wood please use a damp cloth only for cleaning. Avoid use of household cleaners. Phillips screwdriver mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
Page 2 Tighten bolts with allen key (E). sit ﬂush against each other, but do not tighten. Ensure the bolts on the leg braces are loose. This will help to ﬁt the backrests onto the chair. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
Page 3 Take two front chair legs and attach in place using 2x bolts (A) in each leg. Lock 2x bolts (B) to the backrest piece. Tighten bolts with Tighten bolts with allen key (E). Phillips screwdriver. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
Page 4 (B) with the locking nuts (C). Push the backrest piece onto the tops of the long chair legs as shown. Tighten the 2x locking nuts (C) with Phillips screwdriver. Tighten all bolts with allen key (E). mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
Page 5 Hudson Kids Chair Repeat Steps 1 to 6 to assemble the second chair. You’re done, enjoy! mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...