Mocka Hudson Assembly Instructions

Kids table & stools

Hide thumbs Also See for Hudson:

Enlarged version

Hudson Kids Table & Stools

Assembly Instructions

Thank you for your purchase.

Please follow the instructions below for correct assembly.

screw

x 44

Hardware Supplied

Once fully assembled please ensure all legs are

sitting flush against the table/stool underside to

ensure stability. Do not over-tighten screws.

The recommended age for this set is 2-6 years.

The weight limit on the stools is 70kg.

To ensure longevity of the wood please use a damp

cloth only for cleaning. Avoid use of household cleaners.

mocka.co.nz | mocka.com.au

Allen key

Table of Contents

Do you have a question about the Hudson and is the answer not in the manual?

Page 1 Hudson Kids Table & Stools Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. screw Allen key x 44 Hardware Supplied Once fully assembled please ensure all legs are sitting flush against the table/stool underside to ensure stability.
Page 2 Hudson Kids Table & Stools Assembly Instructions Table Find all four table legs and position them on the underside of the table Fasten all screws and ensure all legs are sitting flush with the table top. Using 3x screws (A) and the allen key (B) attach each leg to the underside to ensure stability.
Page 3 Hudson Kids Table & Stools Assembly Instructions Stools x4 Find one round seat piece and four stool legs. Attach each leg to the Repeat Step 3 to assemble the next three stools. Ensure all screws are underside of the seat using 2x screws (A) in each and tightening with fastened and legs sit flush with underside of the seats.