Summary of Contents for Mocka Hudson Kids Table & Chairs
Page 1
Hudson Kids Table & Chairs ASSEMBLY INSTRUCTIONS Thank you for purchasing a Mocka Hudson Kids Table & Chairs set. Please follow the instructions below for correct assembly. screw Allen key x 52 Hardware Supplied Once fully assembled please ensure all legs are sitting flush against the table/stool underside to ensure stability.
Page 2
Using 3x screws (A) and the flush with the table underside to ensure stability. allen key (B) attach each leg to the table. Flip table over and it is ready for use. mocka.co.nz | mocka.com.au...
Page 3
2x screws Ensure all screws are fastened and legs sit flush (A) in each and tightening with the allen key (B). Ensure with underside of the seats. all legs are securely fastened. mocka.co.nz | mocka.com.au...
Page 4
2x screws (A) braces using 2x screws (A) in each. Fasten screws using in each. Tighten screws with allen key (B). allen key (B) ensuring pieces sit flush against each other. mocka.co.nz | mocka.com.au...
Page 5
Take two front chair legs and attach in place using 2x Push the back rest piece onto the tops of the chair legs as shown. Repeat Steps 5 to 8 again to assemble the screws (A) in each leg. Tighten screws with allen key (B). second chair. mocka.co.nz | mocka.com.au...
Page 6
Hudson Kids Table & Chairs ASSEMBLY INSTRUCTIONS All done! Regularly check all screws are secure but not overly tightened. Enjoy! mocka.co.nz | mocka.com.au...
Need help?
Do you have a question about the Hudson Kids Table & Chairs and is the answer not in the manual?
Questions and answers