Accessories - Epson EB-810E Installation Manual

Introduction

Accessories

Part Name
Template sheet
Mini PC plate
Mini PC belt
Cable binding belt
Masking sticker
Safety wire set
Hexagon wrench (for M4)
Spanner (No. 13 for M6)
M4 x 12 mm hexagon sock-
et head cap bolt with wash-
er/spring washer (x13)
Rubber caps
5
Application
Attach this to the wall before attaching
the wall plate, and use it to drill neces-
sary holes.
Attach this to the wall plate when in-
stalling a mini PC or stick PC.
Secure the PC to the plate when at-
taching a mini PC or a stick PC that can-
not be attached using screws.
Secure excess cables after performing
wiring.
Stick this over the groove in the arm
unit to cover it up after installing.
Connect to the setting plate and the
projector to prevent the projector from
falling. See the user's guide supplied
with the safety wire set for more details.
-
-
•
Assemble the wall plate as shown in
the figure on p.4 (x5)
•
Secure the adjustment unit to the pro-
jector (x4)
•
Secure the adjustment unit to the arm
unit (x4)
Attach to the brackets in the foot sec-
tion.