Creating A Disc Using A Connected Blu-Ray Recorder - JVC GZ-E105 User Manual

Creating a Disc Using a Connected Blu-ray
Recorder
You can create discs using a Blu-ray recorder by connecting it to this unit
using a USB cable.
Memo :
To select/move cursor towards up/left or down/right, press the button UP/<
or DOWN/>.
1
Remove the AC adapter and battery pack from this unit.
2
Open the LCD monitor.
3
Connect to a Blu-ray recorder.
A Connect using the provided USB cable.
B Connect the AC adapter to this unit.
This unit powers on automatically when the AC adapter is connected.
0
Be sure to use the supplied AC adapter.
0
C The "SELECT DEVICE" menu appears.
4
Select "CONNECT TO OTHER" and press OK.
The following screen is displayed after the camera operation is
0
completed.
Operations are to be performed on the Blu-ray recorder after the
0
screen switches.
5
Perform dubbing on the Blu-ray recorder.
Refer also to the instruction manual of the Blu-ray recorder.
0
After dubbing is complete, disconnect the USB cable. Operations
0
cannot be performed on this unit until the USB cable is disconnected.
Copying
47