Advertisement
Installing the Stand
CAUTION
Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount
brackets.
The LCD display is very fragile, and must be protected at all times when
installing the base stand. Be sure that no hard or sharp object, or anything that
could scratch or damage the LCD display, comes into contact with it. DO NOT
exert pressure on the front of the TV at any time because the screen could crack.
Follow the illustrations and instructions below to complete the installation steps:
1. Carefully place your TV face-down on a soft, flat surface to prevent damage to the
TV or scratching to the screen.
2. Remove the 2 stands from the accessory bag and then insert the stands into the
bottom slots of the TV.
3. Secure the BASE STAND to the TV with the 4 screws in accessory tightly.
NOTE
Pictures are only for reference, actual product may vary in appearance.
WALL-MOUNT BRACKET SPECIFICATIONS
Wall-Mount hole pattern (mm)
Wall-Mount screw size
Installing the Stand
BASE STAND
Screws: ST4×12F (32")
200 × 200
M6
2
ST4×25C (39")
8.0~10.0mm
Advertisement
