Advertisement
Installing Batteries in the Remote Control
1. Slide the back cover to open the battery compartment of the remote control.
2. Insert two AAA size batteries. Make sure to match the ( + ) and ( - ) ends of the
batteries with the ( + ) and ( - ) ends indicated in the battery compartment.
3. Close the battery compartment cover.
Gently push and slide
1
NOTES
Product image is only for reference, actual product may vary in appearance.
Dispose of your batteries in a designated disposal area. Do not throw the batteries
into a fire.
Do not mix battery types or combine used batteries with new ones.
Remove depleted batteries immediately to prevent battery acid from leaking into
the battery compartment.
If you do not intend to use the remote control for a long time, remove the batteries.
Batteries should not be exposed to excessive heat, such as sunshine, heat
registers, or fire.
Battery chemicals can cause a rash. If the batteries leak, clean the battery
compartment with a cloth. If chemicals touch your skin, wash immediately.
Remote Control Operation Range
1. The remote control can work at a
distance of up to 8 meters in front of
the TV set.
2. The remote control angle: taking the
remote sensor as an apex, 6 meters
away, its controlled horizontal angle is
within ±30°, while the vertical angle is
within ±15°.
3. The operating distance may vary
depending on the brightness of the
room.
Remote Control
Insert the batteries
2
11
Gently push and slide
3
Advertisement
