Advertisement
If a USB 1.1 or USB2.0 device requires more than 500mA or 5V, the USB device
may not be supported. Exceeding the max supported current may result in damage
or data loss.
If you want to store the video streaming of a DTV program, the transfer rate of the
USB storage device must not be less than 5MB/s.
LAN (Wired setup)
Connect your TV to your network by connecting the LAN port on the back of your
TV to an external modem or router using a LAN (Ethernet/Cat 5) cable. See the
illustration below.
· We recommend to use a modem or router that supports Dynamic Host
Configuration Protocol (DHCP). Modems and routers that support DHCP
automatically provide the IP address, subnet mask, gateway, and DNS, so you
don't have to enter them manually. Most home networks already have DHCP.
TV JACK
LAN
LAN Cable
Wireless setup
Connect your TV to your wireless network, you need a wireless router or modem.
See the illustration below.
· The TV's built-in Wireless LAN Adapter supports the IEEE 802.11 b/g/n
communication protocols.
Making Connections
IP Sharer (Router)
(with DHCP server)
Wireless LAN Adapter
built-in TV set
8
External Modem
(ADSL / VDSL / Cable TV)
LAN Cable
Wireless router with DHCP
Modem Cable
LAN Cable
Advertisement
